Docs Menu
Docs Home
/
MongoDB Manual
/ / /

aggregate

On this page

  • Definition
  • Compatibility
  • Syntax
  • Sessions
  • Transactions
  • Query Settings
  • Stable API
  • Example
aggregate

Performs aggregation operation using the aggregation pipeline. The pipeline allows users to process data from a collection or other source with a sequence of stage-based manipulations.

Tip

In mongosh, this command can also be run through the db.aggregate() and db.collection.aggregate() helper methods or with the watch() helper method.

Helper methods are convenient for mongosh users, but they may not return the same level of information as database commands. In cases where the convenience is not needed or the additional return fields are required, use the database command.

This command is available in deployments hosted in the following environments:

  • MongoDB Atlas: The fully managed service for MongoDB deployments in the cloud

Important

This command has limited support in M0, M2, and M5 clusters. For more information, see Unsupported Commands.

Changed in version 5.0.

The command has the following syntax:

db.runCommand(
{
aggregate: "<collection>" || 1,
pipeline: [ <stage>, <...> ],
explain: <boolean>,
allowDiskUse: <boolean>,
cursor: <document>,
maxTimeMS: <int>,
bypassDocumentValidation: <boolean>,
readConcern: <document>,
collation: <document>,
hint: <string or document>,
comment: <any>,
writeConcern: <document>,
let: <document> // Added in MongoDB 5.0
}
)

The aggregate command takes the following fields as arguments:

Field
Type
Description
aggregate
string
The name of the collection or view that acts as the input for the aggregation pipeline. Use 1 for collection agnostic commands.
pipeline
array
An array of aggregation pipeline stages that process and transform the document stream as part of the aggregation pipeline.
explain
boolean

Optional. Specifies to return the information on the processing of the pipeline.

Not available in multi-document transactions.

allowDiskUse

boolean

Optional.

Use this option to override allowDiskUseByDefault for a specific query. You can use this option to either:

  • Prohibit disk use on a system where disk use is allowed by default.

  • Allow disk use on a system where disk use is prohibited by default.

Starting in MongoDB 6.0, if allowDiskUseByDefault is set to true and the server requires more than 100 megabytes of memory for a pipeline execution stage, MongoDB automatically writes temporary files to disk unless the query specifies { allowDiskUse: false }.

For details, see allowDiskUseByDefault.

The profiler log messages and diagnostic log messages includes a usedDisk indicator if any aggregation stage wrote data to temporary files due to memory restrictions.

cursor
document

Specify a document that contains options that control the creation of the cursor object.

MongoDB removes the use of aggregate command without the cursor option unless the command includes the explain option. Unless you include the explain option, you must specify the cursor option.

  • To indicate a cursor with the default batch size, specify cursor: {}.

  • To indicate a cursor with a non-default batch size, use cursor: { batchSize: <num> }.

maxTimeMS
non-negative integer

Optional.

Specifies a time limit in milliseconds. If you do not specify a value for maxTimeMS, operations will not time out. A value of 0 explicitly specifies the default unbounded behavior.

MongoDB terminates operations that exceed their allotted time limit using the same mechanism as db.killOp(). MongoDB only terminates an operation at one of its designated interrupt points.

bypassDocumentValidation
boolean

Optional. Applicable only if you specify the $out or $merge aggregation stages.

Enables aggregate to bypass document validation during the operation. This lets you insert documents that do not meet the validation requirements.

readConcern
document

Optional. Specifies the read concern.

The readConcern option has the following syntax: readConcern: { level: <value> }

Possible read concern levels are:

For more formation on the read concern levels, see Read Concern Levels.

The $out stage cannot be used in conjunction with read concern "linearizable". If you specify "linearizable" read concern for db.collection.aggregate(), you cannot include the $out stage in the pipeline.

The $merge stage cannot be used in conjunction with read concern "linearizable". That is, if you specify "linearizable" read concern for db.collection.aggregate(), you cannot include the $merge stage in the pipeline.

collation
document

Optional.

Specifies the collation to use for the operation.

Collation allows users to specify language-specific rules for string comparison, such as rules for lettercase and accent marks.

The collation option has the following syntax:

collation: {
locale: <string>,
caseLevel: <boolean>,
caseFirst: <string>,
strength: <int>,
numericOrdering: <boolean>,
alternate: <string>,
maxVariable: <string>,
backwards: <boolean>
}

When specifying collation, the locale field is mandatory; all other collation fields are optional. For descriptions of the fields, see Collation Document.

If the collation is unspecified but the collection has a default collation (see db.createCollection()), the operation uses the collation specified for the collection.

If no collation is specified for the collection or for the operations, MongoDB uses the simple binary comparison used in prior versions for string comparisons.

You cannot specify multiple collations for an operation. For example, you cannot specify different collations per field, or if performing a find with a sort, you cannot use one collation for the find and another for the sort.

hint
string or document

Optional. The index to use for the aggregation. The index is on the initial collection/view against which the aggregation is run.

Specify the index either by the index name or by the index specification document.

The hint does not apply to $lookup and $graphLookup stages.

comment
any

Optional. A user-provided comment to attach to this command. Once set, this comment appears alongside records of this command in the following locations:

A comment can be any valid BSON type (string, integer, object, array, etc).

Any comment set on a aggregate command is inherited by any subsequent getMore commands run on the aggregate cursor.

writeConcern
document

Optional. A document that expresses the write concern to use with the $out or $merge stage.

Omit to use the default write concern with the $out or $merge stage.

let
document

Optional.

Specifies a document with a list of variables. This allows you to improve command readability by separating the variables from the query text.

The document syntax is:

{
<variable_name_1>: <expression_1>,
...,
<variable_name_n>: <expression_n>
}

The variable is set to the value returned by the expression, and cannot be changed afterwards.

To access the value of a variable in the command, use the double dollar sign prefix ($$) together with your variable name in the form $$<variable_name>. For example: $$targetTotal.

To use a variable to filter results in a pipeline $match stage, you must access the variable within the $expr operator.

For a complete example using let and variables, see Use Variables in let.

New in version 5.0.

MongoDB removes the use of aggregate command without the cursor option unless the command includes the explain option. Unless you include the explain option, you must specify the cursor option.

  • To indicate a cursor with the default batch size, specify cursor: {}.

  • To indicate a cursor with a non-default batch size, use cursor: { batchSize: <num> }.

For more information about the aggregation pipeline Aggregation Pipeline, Aggregation Reference, and Aggregation Pipeline Limits.

For cursors created inside a session, you cannot call getMore outside the session.

Similarly, for cursors created outside of a session, you cannot call getMore inside a session.

MongoDB drivers and mongosh associate all operations with a server session, with the exception of unacknowledged write operations. For operations not explicitly associated with a session (i.e. using Mongo.startSession()), MongoDB drivers and mongosh create an implicit session and associate it with the operation.

If a session is idle for longer than 30 minutes, the MongoDB server marks that session as expired and may close it at any time. When the MongoDB server closes the session, it also kills any in-progress operations and open cursors associated with the session. This includes cursors configured with noCursorTimeout() or a maxTimeMS() greater than 30 minutes.

For operations that return a cursor, if the cursor may be idle for longer than 30 minutes, issue the operation within an explicit session using Mongo.startSession() and periodically refresh the session using the refreshSessions command. See Session Idle Timeout for more information.

aggregate can be used inside distributed transactions.

However, the following stages are not allowed within transactions:

You also cannot specify the explain option.

  • For cursors created outside of a transaction, you cannot call getMore inside the transaction.

  • For cursors created in a transaction, you cannot call getMore outside the transaction.

Important

In most cases, a distributed transaction incurs a greater performance cost over single document writes, and the availability of distributed transactions should not be a replacement for effective schema design. For many scenarios, the denormalized data model (embedded documents and arrays) will continue to be optimal for your data and use cases. That is, for many scenarios, modeling your data appropriately will minimize the need for distributed transactions.

For additional transactions usage considerations (such as runtime limit and oplog size limit), see also Production Considerations.

For aggregate operation that do not include the $out or $merge stages:

Starting in MongoDB 4.2, if the client that issued aggregate disconnects before the operation completes, MongoDB marks aggregate for termination using killOp.

New in version 8.0.

You can use query settings to set index hints, set operation rejection filters, and other fields. The settings apply to the query shape on the entire cluster. The cluster retains the settings after shutdown.

The query optimizer uses the query settings as an additional input during query planning, which affects the plan selected to run the query. You can also use query settings to block a query shape.

To add query settings and explore examples, see setQuerySettings.

You can add query settings for find, distinct, and aggregate commands.

Query settings have more functionality and are preferred over deprecated index filters.

To remove query settings, use removeQuerySettings. To obtain the query settings, use a $querySettings stage in an aggregation pipeline.

When using Stable API V1:

MongoDB removes the use of aggregate command without the cursor option unless the command includes the explain option. Unless you include the explain option, you must specify the cursor option.

  • To indicate a cursor with the default batch size, specify cursor: {}.

  • To indicate a cursor with a non-default batch size, use cursor: { batchSize: <num> }.

Rather than run the aggregate command directly, most users should use the db.collection.aggregate() helper provided in mongosh or the equivalent helper in their driver. In 2.6 and later, the db.collection.aggregate() helper always returns a cursor.

Except for the first two examples which demonstrate the command syntax, the examples in this page use the db.collection.aggregate() helper.

A collection articles contains documents such as the following:

{
_id: ObjectId("52769ea0f3dc6ead47c9a1b2"),
author: "abc123",
title: "zzz",
tags: [ "programming", "database", "mongodb" ]
}

The following example performs an aggregate operation on the articles collection to calculate the count of each distinct element in the tags array that appears in the collection.

db.runCommand( {
aggregate: "articles",
pipeline: [
{ $project: { tags: 1 } },
{ $unwind: "$tags" },
{ $group: { _id: "$tags", count: { $sum : 1 } } }
],
cursor: { }
} )

In mongosh, this operation can use the db.collection.aggregate() helper as in the following:

db.articles.aggregate( [
{ $project: { tags: 1 } },
{ $unwind: "$tags" },
{ $group: { _id: "$tags", count: { $sum : 1 } } }
] )

The following example runs a pipeline with two stages on the admin database. The first stage runs the $currentOp operation and the second stage filters the results of that operation.

db.adminCommand( {
aggregate : 1,
pipeline : [ {
$currentOp : { allUsers : true, idleConnections : true } }, {
$match : { shard : "shard01" }
}
],
cursor : { }
} )

Note

The aggregate command does not specify a collection and instead takes the form {aggregate: 1}. This is because the initial $currentOp stage does not draw input from a collection. It produces its own data that the rest of the pipeline uses.

The new db.aggregate() helper has been added to assist in running collectionless aggregations such as this. The above aggregation could also be run like this example.

The following aggregation operation sets the optional field explain to true to return information about the aggregation operation.

db.orders.aggregate([
{ $match: { status: "A" } },
{ $group: { _id: "$cust_id", total: { $sum: "$amount" } } },
{ $sort: { total: -1 } }
],
{ explain: true }
)

Note

The explain output is subject to change between releases.

Tip

See also:

Starting in MongoDB 6.0, pipeline stages that require more than 100 megabytes of memory to execute write temporary files to disk by default. These temporary files last for the duration of the pipeline execution and can influence storage space on your instance. In earlier versions of MongoDB, you must pass { allowDiskUse: true } to individual find and aggregate commands to enable this behavior.

Individual find and aggregate commands can override the allowDiskUseByDefault parameter by either:

  • Using { allowDiskUse: true } to allow writing temporary files out to disk when allowDiskUseByDefault is set to false

  • Using { allowDiskUse: false } to prohibit writing temporary files out to disk when allowDiskUseByDefault is set to true

The profiler log messages and diagnostic log messages includes a usedDisk indicator if any aggregation stage wrote data to temporary files due to memory restrictions.

To specify an initial batch size, specify the batchSize in the cursor field, as in the following example:

db.orders.aggregate( [
{ $match: { status: "A" } },
{ $group: { _id: "$cust_id", total: { $sum: "$amount" } } },
{ $sort: { total: -1 } },
{ $limit: 2 }
],
{ cursor: { batchSize: 0 } }
)

The { cursor: { batchSize: 0 } } document, which specifies the size of the initial batch size, indicates an empty first batch. This batch size is useful for quickly returning a cursor or failure message without doing significant server-side work.

To specify batch size for subsequent getMore operations (after the initial batch), use the batchSize field when running the getMore command.

Collation allows users to specify language-specific rules for string comparison, such as rules for lettercase and accent marks.

A collection myColl has the following documents:

{ _id: 1, category: "café", status: "A" }
{ _id: 2, category: "cafe", status: "a" }
{ _id: 3, category: "cafE", status: "a" }

The following aggregation operation includes the Collation option:

db.myColl.aggregate(
[ { $match: { status: "A" } }, { $group: { _id: "$category", count: { $sum: 1 } } } ],
{ collation: { locale: "fr", strength: 1 } }
);

For descriptions on the collation fields, see Collation Document.

Create a collection foodColl with the following documents:

db.foodColl.insertMany( [
{ _id: 1, category: "cake", type: "chocolate", qty: 10 },
{ _id: 2, category: "cake", type: "ice cream", qty: 25 },
{ _id: 3, category: "pie", type: "boston cream", qty: 20 },
{ _id: 4, category: "pie", type: "blueberry", qty: 15 }
] )

Create the following indexes:

db.foodColl.createIndex( { qty: 1, type: 1 } );
db.foodColl.createIndex( { qty: 1, category: 1 } );

The following aggregation operation includes the hint option to force the usage of the specified index:

db.foodColl.aggregate(
[ { $sort: { qty: 1 }}, { $match: { category: "cake", qty: 10 } }, { $sort: { type: -1 } } ],
{ hint: { qty: 1, category: 1 } }
)

To override the default read concern level, use the readConcern option. The getMore command uses the readConcern level specified in the originating aggregate command.

You cannot use the $out or the $merge stage in conjunction with read concern "linearizable". That is, if you specify "linearizable" read concern for db.collection.aggregate(), you cannot include either stages in the pipeline.

The following operation on a replica set specifies a read concern of "majority" to read the most recent copy of the data confirmed as having been written to a majority of the nodes.

Important

  • You can specify read concern level "majority" for an aggregation that includes an $out stage.

  • Regardless of the read concern level, the most recent data on a node may not reflect the most recent version of the data in the system.

db.restaurants.aggregate(
[ { $match: { rating: { $lt: 5 } } } ],
{ readConcern: { level: "majority" } }
)

To ensure that a single thread can read its own writes, use "majority" read concern and "majority" write concern against the primary of the replica set.

New in version 5.0.

To define variables that you can access elsewhere in the command, use the let option.

Note

To filter results using a variable in a pipeline $match stage, you must access the variable within the $expr operator.

Create a collection cakeSales containing sales for cake flavors:

db.cakeSales.insertMany( [
{ _id: 1, flavor: "chocolate", salesTotal: 1580 },
{ _id: 2, flavor: "strawberry", salesTotal: 4350 },
{ _id: 3, flavor: "cherry", salesTotal: 2150 }
] )

The following example:

  • retrieves the cake that has a salesTotal greater than 3000, which is the cake with an _id of 2

  • defines a targetTotal variable in let, which is referenced in $gt as $$targetTotal

db.runCommand( {
aggregate: db.cakeSales.getName(),
pipeline: [
{ $match: {
$expr: { $gt: [ "$salesTotal", "$$targetTotal" ] }
} },
],
cursor: {},
let: { targetTotal: 3000 }
} )

Back

Aggregation