AI 에이전트의 경우: 문서 인덱스는 https://www.mongodb.com/ko-kr/docs/llms.txt에서 사용할 수 있으며, 모든 페이지의 마크다운 버전은 어떤 URL 경로에 .md를 추가하여 사용할 수 있습니다.

제품 사용 원격 측정 문제 해결

This page describes how to resolve issues with product usage telemetry in Ops Manager 9.0.2, 8.0.28, and later. To learn how product usage telemetry works, see Product Usage Telemetry.

If the Product Telemetry Collection toggle is locked on, the installed license key doesn't include an active telemetry exemption. Without an exemption, product usage telemetry is mandatory.

제품 사용 원격 측정 기능을 끄려면 설치된 라이선스 키에 활성 원격 측정 예외가 있어야 합니다. 예외 작동 방식에 대한 자세한 내용은 원격 측정 예외를 참조하십시오. 그런 다음 다음 절차를 따르십시오.

1

Admin, License Keys을(를) 클릭합니다.

2

Check whether the active key lists the Telemetry Exemption entitlement.

3

라이선스 키에 면제 사항이 명시되어 있지 않으면 MongoDB 계정 담당 팀에 문의하십시오. 키를 생성한 후 면제가 승인된 경우, 면제 사항이 포함된 새 키를 생성하여 설치하십시오. 자세한 내용은 Ops Manager의 라이선스 키 관리 섹션을 참조하십시오.

4

Reload the Telemetry tab and turn off the Product Telemetry Collection toggle.

관리 API를 사용하여 라이선스 키를 생성하고 설치할 수도 있습니다. 자세한 내용은 API를 사용한 라이선스 키 관리하기를 참조하세요.

If a banner appears on the Deployment pages, Ops Manager hasn't sent product usage telemetry to MongoDB for 8 or more days. To resolve the banner, work through the following steps.

1

Click Admin, General, Ops Manager Config, Telemetry. Check Last Successful Upload and Next Scheduled Upload. If Ops Manager was installed or upgraded less than seven days ago, the first send may not be due yet.

2

From each Ops Manager host, check that the host can open an HTTPS connection to cloud.mongodb.com on port 443.

3

Check /opt/mongodb/mms/logs/mms0.log for these messages:

Log message
설명
해상도

Unable to send the product-usage-metrics payload.

MongoDB로의 전송이 실패했습니다. 해당 항목에는 기본 오류가 포함되어 있습니다. Ops Manager는 전송되지 않은 스냅샷을 보관하고 자동으로 재시도합니다.

연결 문제를 해결하기 위해 다음 단계로 진행하세요.

Unable to collect the product-usage-metrics payload.

Ops Manager가 스냅샷을 생성할 수 없습니다. 오류 메시지에는 기본 오류가 포함되어 있습니다. 스냅샷이 생성되지 않았습니다. Ops Manager는 다음 예약 실행 시 스냅샷 수집을 다시 시도합니다.

근본적인 오류를 확인하려면 동일한 로그 항목을 확인하십시오.

Unable to read the license exemptions; treating usage telemetry as mandatory.

Ops Manager가 라이선스 키 상태를 읽을 수 없으므로 제품 사용 원격 측정 데이터를 필수 항목으로 처리합니다.

라이선스 키가 설치되었는지 확인하십시오. 메시지가 계속 표시되면 MongoDB 계정 담당 팀에 문의하십시오.

Product-usage snapshot <id> delivered.

전송에 성공했습니다.

별도의 조치가 필요하지 않습니다. 전송이 완료되면 배너가 자동으로 사라집니다.

The mms0.log file rolls over daily. The logs are compressed and kept for 30 days.

4

연결을 차단하는 방화벽, TLS 검사 또는 프록시 규칙을 수정하십시오.

5

다음 작업 실행까지 6시간 이내로 기다려 주십시오. Ops Manager는 전송되지 않은 스냅샷을 자동으로 재전송하며, 전송에 성공하면 배너가 사라집니다.

6

사용 환경에서 네트워크 외부로 데이터를 전송할 수 없는 경우, 원격 측정 예외 사항에 대해 담당 계정 팀에 문의하십시오.