자체 관리 배포서버 연결 문자열 예시

연결 문자열을 사용하여 MongoDB 인스턴스와 다음 대상 간의 연결을 정의할 수 있습니다.

드라이버를 사용해서 연결할 경우의 애플리케이션입니다.
MongoDB Compass, MongoDB Shell(mongosh) 등의 도구

이 페이지에서는 일반적인 연결 대상에 대한 예시 URI 문자열을 제공합니다.

사용자 이름 및 비밀번호로 인증하는 클러스터

다음 복제본 세트 연결 문자열에는 이러한 요소가 포함되어 있습니다.

replicaSet 옵션
복제본 세트 구성에 나열된 mongod 인스턴스의 호스트 이름
액세스 제어 시행을 위해 비밀번호 D1fficultP%40ssw0rd을 사용하여 사용자 myDatabaseUser로 인증합니다.

mongosh "mongodb+srv://mongodb0.example.com/?authSource=admin&replicaSet=myRepl" --apiVersion 1 --username myDatabaseUser

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin&replicaSet=myRepl

사용자 이름 또는 암호에 다음 문자가 포함되어 있는 경우 해당 문자는 퍼센트 인코딩 을 사용하여 변환해야 합니다.

$ : / ? # [ ] @

다음과 같은 샤딩된 클러스터 연결 문자열에는 이러한 요소가 포함됩니다.

연결 문자열의 mongos 호스트
액세스 제어 시행을 위해 비밀번호 D1fficultP%40ssw0rd을 사용하여 사용자 myDatabaseUser로 인증합니다.

mongosh "mongodb+srv://mongos0.example.com/?authSource=admin" --apiVersion 1 --username myDatabaseUser

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com/?authSource=admin

사용자 이름 또는 비밀번호에 다음 문자가 포함된 경우 해당 문자는 퍼센트 인코딩을 사용하여 변환해야 합니다.

$ : / ? # [ ] @

다음 독립형 연결 문자열은 액세스 제어를 시행하기 위해 비밀번호 D1fficultP%40ssw0rd를 사용하여 사용자 myDatabaseUser로 인증합니다.

mongosh "mongodb+srv://mongodb0.example.com/?authSource=admin" --apiVersion 1 --username myDatabaseUser

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

mongodb+srv://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com/?authSource=admin

사용자 이름 또는 비밀번호에 다음 문자가 포함된 경우 해당 문자는 퍼센트 인코딩을 사용하여 변환해야 합니다.

$ : / ? # [ ] @

다음 복제본 세트 연결 문자열에는 이러한 요소가 포함되어 있습니다.

replicaSet 옵션
복제본 세트 구성에 나열된 mongod 인스턴스의 호스트 이름
액세스 제어를 적용하기 위한 사용자 이름과 비밀번호:

mongosh "mongodb://mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017,mongodb1.example.com:27017,mongodb2.example.com:27017/?authSource=admin&replicaSet=myRepl

사용자 이름 또는 비밀번호에 다음 문자가 포함된 경우 해당 문자는 퍼센트 인코딩을 사용하여 변환해야 합니다.

$ : / ? # [ ] @

다음과 같은 샤딩된 클러스터 연결 문자열에는 이러한 요소가 포함됩니다.

연결 문자열의 mongos 호스트
액세스 제어를 강화하기 위한 사용자 이름과 비밀번호

mongosh "mongodb://mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongos0.example.com:27017,mongos1.example.com:27017,mongos2.example.com:27017/?authSource=admin

사용자 이름 또는 비밀번호에 다음 문자가 포함된 경우 해당 문자는 퍼센트 인코딩을 사용하여 변환해야 합니다.

$ : / ? # [ ] @

다음 독립형 연결 문자열은 액세스 제어를 적용합니다.

mongosh "mongodb://@mongodb0.example.com:27017/?authSource=admin" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@mongodb0.example.com:27017/?authSource=admin

사용자 이름 또는 비밀번호에 다음 문자가 포함된 경우 해당 문자는 퍼센트 인코딩을 사용하여 변환해야 합니다.

$ : / ? # [ ] @

로컬에서 실행되는 데이터베이스 서버

다음 예시 기본값 포트에서 로컬로 실행 데이터베이스 서버 에 연결합니다.

mongosh "mongodb://localhost" --apiVersion 1 --username myDatabaseUser

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

mongodb://localhost

`admin` 로컬에서 데이터베이스 실행

다음 예시 비밀번호가 D1fficultP%40ssw0rd인 사용자 myDatabaseUser (으)로 admin 데이터베이스 에 연결하고 로그인합니다.

mongosh "mongodb://localhost" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost

`records` 로컬에서 데이터베이스 실행

다음 예시 비밀번호가 D1fficultP%40ssw0rd인 사용자 myDatabaseUser (으)로 records 데이터베이스 에 연결하고 로그인합니다.

mongosh "mongodb://localhost/records" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost/records

UNIX 도메인 소켓

UNIX 도메인 소켓에 연결할 때는 URL 인코딩 연결 문자열 사용합니다.

다음 예시 비밀번호가 D1fficultP%40ssw0rd인 사용자 myDatabaseUser 로 파일 경로가 /tmp/mongodb-27017.sock 인 UNIX 도메인 소켓에 연결합니다.

mongosh "mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@%2Ftmp%2Fmongodb-27017.sock

참고

모든 드라이버가 UNIX 도메인 소켓을 지원하는 것은 아닙니다. 해당 드라이버에 관한 정보는 Drivers(드라이버) 설명서를 참조하세요.

서로 다른 호스트에 멤버가 있는 복제본 세트

다음 예시 비밀번호가 db1.example.net db2.example.net myDatabaseUser 인 사용자(으)로 멤버가 두 개(하나는 에, 다른 하나는 에 있음)가 있는 복제본 세트 에 D1fficultP%40ssw0rd 연결합니다.

참고

복제본 세트의 경우 복제본 세트 구성에 명시된 대로 mongod 인스턴스의 호스트 이름을 지정하세요.

mongosh "mongodb://db1.example.net,db2.example.com/?replicaSet=test" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@db1.example.net,db2.example.com/?replicaSet=test

멤버가 있는 복제본 세트 `localhost`

다음 예시 비밀번호가 D1fficultP%40ssw0rd인 사용자 myDatabaseUser 로서 포트 27017, 27018, 27019 의 localhost 에서 실행 세 멤버가 있는 복제본 세트 에 연결합니다.

참고

복제본 세트의 경우 복제본 세트 구성에 명시된 대로 mongod 인스턴스의 호스트 이름을 지정하세요.

mongosh "mongodb://localhost,localhost:27018,localhost:27019/?replicaSet=test" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@localhost,localhost:27018,localhost:27019/?replicaSet=test

읽기 배포가 포함된 복제본 세트

다음 예시 멤버가 3명인 복제본 세트 에 연결하고 myDatabaseUser 비밀번호가 인 사용자 로서 읽기를 세컨더리에 D1fficultP%40ssw0rd 배포합니다.

참고

복제본 세트의 경우 복제본 세트 구성에 명시된 대로 mongod 인스턴스의 호스트 이름을 지정하세요.

mongosh "mongodb://example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&readPreference=secondary

쓰기 고려 수준이 높은 복제본 세트

다음 예시 쓰기 고려 (write concern) 구성된 복제본 세트 에 연결하여 데이터 보유 투표 멤버의 과반수가 제한 시간 2초로 복제 성공할 때까지 대기합니다. 비밀번호 D1fficultP%40ssw0rd을(를) 사용하여 사용자 myDatabaseUser (으)로 인증합니다.

참고

복제본 세트의 경우 복제본 세트 구성에 명시된 대로 mongod 인스턴스의 호스트 이름을 지정하세요.

mongosh "mongodb://example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@example1.com,example2.com,example3.com/?replicaSet=test&w=majority&wtimeoutMS=2000

샤딩된 클러스터

다음 예시 mongos myDatabaseUser 비밀번호가 인 사용자(으)로 인스턴스가 3개 있는 샤딩된 클러스터 에 D1fficultP%40ssw0rd 연결합니다.

mongosh "mongodb://router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/" --apiVersion 1 --username myDatabaseUser

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

mongodb://myDatabaseUser:D1fficultP%40ssw0rd@router1.example.com:27017,router2.example2.com:27017,router3.example3.com:27017/

돌아가기

예시

인증

사용자 이름 및 비밀번호로 인증하는 클러스터

로컬에서 실행되는 데이터베이스 서버

admin 로컬에서 데이터베이스 실행

records 로컬에서 데이터베이스 실행

UNIX 도메인 소켓

참고

서로 다른 호스트에 멤버가 있는 복제본 세트

참고

멤버가 있는 복제본 세트 localhost

참고

읽기 배포가 포함된 복제본 세트

참고

쓰기 고려 수준이 높은 복제본 세트

참고

샤딩된 클러스터

`admin` 로컬에서 데이터베이스 실행

`records` 로컬에서 데이터베이스 실행

멤버가 있는 복제본 세트 `localhost`