Navigation
This version of the documentation is archived and no longer supported.

Upgrade a Sharded Cluster to 4.0

Important

MongoDB 4.0 may lose data during unclean shutdowns on macOS 10.12.x, 10.13.x, and 10.14.0. This issue was fixed by Apple in macOS 10.14.1.

For details, see WT-4018.

Important

Before you attempt any upgrade, please familiarize yourself with the content of this document.

If you need guidance on upgrading to 4.0, MongoDB offers major version upgrade services to help ensure a smooth transition without interruption to your MongoDB application.

Upgrade Recommendations and Checklists

When upgrading, consider the following:

Upgrade Version Path

To upgrade an existing MongoDB deployment to 4.0, you must be running a 3.6-series release.

To upgrade from a version earlier than the 3.6-series, you must successively upgrade major releases until you have upgraded to 3.6-series. For example, if you are running a 3.4-series, you must upgrade first to 3.6 before you can upgrade to 4.0.

Check Driver Compatibility

Before you upgrade MongoDB, check that you’re using a MongoDB 4.0-compatible driver. Consult the driver documentation for your specific driver to verify compatibility with MongoDB 4.0.

Upgraded deployments that run on incompatible drivers might encounter unexpected or undefined behavior.

Preparedness

Before beginning your upgrade, see the Compatibility Changes in MongoDB 4.0 document to ensure that your applications and deployments are compatible with MongoDB 4.0. Resolve the incompatibilities in your deployment before starting the upgrade.

Before upgrading MongoDB, always test your application in a staging environment before deploying the upgrade to your production environment.

Downgrade Consideration

Once upgraded to 4.0, if you need to downgrade, we recommend downgrading to the latest patch release of 3.6.

Default Bind to Localhost

The following procedure includes the command-line option --bind_ip or the configuration option net.bindIp when restarting the replica set.

Starting in MongoDB 3.6, the options must be specified when the replica set members are run on different hosts or if remote clients connect to the deployment. Omit if all members are run on the same host and all clients are local to the host.

Warning

Before binding to a non-localhost (e.g. publicly accessible) IP address, ensure you have secured your cluster from unauthorized access. For a complete list of security recommendations, see Security Checklist. At minimum, consider enabling authentication and hardening network infrastructure.

Read Concern Majority (3-Member Primary-Secondary-Arbiter Architecture)

Starting in MongoDB 3.6, MongoDB enables support for "majority" read concern by default.

For MongoDB 4.0.3+ (and 3.6.1+), you can disable read concern "majority" to prevent the storage cache pressure from immobilizing a deployment with a three-member replica set with a primary-secondary-arbiter (PSA) architecture or a sharded cluster with a three-member PSA shards.

Note

Disabling "majority" read concern has no effect on change streams availability.

Disabling "majority" does not affect multi-document transactions; i.e. you can specify read concern "majority" for transactions even if read concern "majority" is disabled.

For more information, see Disable Read Concern Majority.

Change Streams Resume Tokens

MongoDB 4.0 introduces new hex-encoded string change stream resume tokens:

The resume token _data type depends on the MongoDB versions and, in some cases, the feature compatibility version (fcv) at the time of the change stream’s opening/resumption (i.e. a change in fcv value does not affect the resume tokens for already opened change streams):

MongoDB Version Feature Compatibility Version Resume Token _data Type
MongoDB 4.0.7 and later “4.0” or “3.6” Hex-encoded string (v1)
MongoDB 4.0.6 and earlier “4.0” Hex-encoded string (v0)
MongoDB 4.0.6 and earlier “3.6” BinData
MongoDB 3.6 “3.6” BinData

When upgrading from MongoDB 3.6 to MongoDB 4.0.7

When upgrading from MongoDB 3.6 to MongoDB 4.0.7 or later, the upgraded sharded cluster members continue to produce v0 token until the first mongos instance is upgraded. If a client tries to resume change streams using the new v1 resume token when connected to another mongos that has not been updated (i.e. only accepts BinData resume tokens), the resume operation will fail. In such cases, the client must wait for the upgrade to complete before resuming change streams.

After upgrading, if you later decide to downgrade to MongoDB 3.6, to resume a change stream, clients can use a pre-upgrade resume token (if available) on the 3.6 deployment. Otherwise, clients will need to start a new change stream.

Prerequisites

All Members Version

To upgrade a sharded cluster to 4.0, all members of the cluster must be at least version 3.6. The upgrade process checks all components of the cluster and will produce warnings if any component is running version earlier than 3.6.

Replica Set Member State

For shards and config servers, ensure that no replica set member is in ROLLBACK or RECOVERING state.

Remove Support for MONGODB-CR

Starting in version 4.0, MongoDB removes support for the deprecated MongoDB Challenge-Response (MONGODB-CR) authentication mechanism.

If your deployment has user credentials stored in MONGODB-CR schema, you must upgrade to Salted Challenge Response Authentication Mechanism (SCRAM) before you upgrade to version 4.0. For information on upgrading to SCRAM, see Upgrade to SCRAM.

Remove pv0 for Replica Sets

Starting in version 4.0, MongoDB removes the deprecated replica set protocol version 0 pv0.

Before upgrading to MongoDB 4.0, you must upgrade to pv1.

To upgrade to pv1, connect a mongo shell to the replica set primary and perform the following sequence of operations:

cfg = rs.conf();
cfg.protocolVersion=1;
rs.reconfig(cfg);

To reduce the likelihood of w:1 rollbacks, you can also reconfigure the replica set to a higher settings.catchUpTimeoutMillis setting.

For more information on pv1, see Replica Set Protocol Version.

Remove Master-Slave Replication

MongoDB 4.0 removes support for the deprecated master-slave replication. Before you can upgrade to MongoDB 4.0, if your deployment uses master-slave replication, you must upgrade to a replica set.

To convert from master-slave replication to a replica set, see Convert a Master-Slave Deployment to a Replica Set.

Remove Support for $isolated

MongoDB drops support for the $isolated operator. If you have an existing partial index that includes the $isolated operator or a view that includes a $isolated operator, recreate the index or view without the operator in the definition before upgrading.

Feature Compatibility Version

The 3.6 sharded cluster must have featureCompatibilityVersion set to 3.6.

To ensure that all members of the sharded cluster have featureCompatibilityVersion set to 3.6, connect to each shard replica set member and each config server replica set member and check the featureCompatibilityVersion:

Tip

For a sharded cluster that has access control enabled, to run the following command against a shard replica set member, you must connect to the member as a shard local user.

db.adminCommand( { getParameter: 1, featureCompatibilityVersion: 1 } )

All members should return a result that includes "featureCompatibilityVersion" : { "version" : "3.6" }.

To set or update featureCompatibilityVersion, run the following command on the mongos:

db.adminCommand( { setFeatureCompatibilityVersion: "3.6" } )

For more information, see setFeatureCompatibilityVersion.

Back up the config Database

Optional but Recommended. As a precaution, take a backup of the config database before upgrading the sharded cluster.

Download 4.0 Binaries

Use Package Manager

If you installed MongoDB from the MongoDB apt, yum, dnf, or zypper repositories, you should upgrade to 4.0 using your package manager.

Follow the appropriate 4.0 installation instructions for your Linux system. This will involve adding a repository for the new release, then performing the actual upgrade process.

Download 4.0 Binaries Manually

If you have not installed MongoDB using a package manager, you can manually download the MongoDB binaries from the MongoDB Download Center.

See 4.0 installation instructions for more information.

Upgrade Process

1

Disable the Balancer.

Connect a mongo shell to a mongos instance in the sharded cluster, and run sh.stopBalancer() to disable the balancer:

sh.stopBalancer()

Note

If a migration is in progress, the system will complete the in-progress migration before stopping the balancer. You can run sh.isBalancerRunning() to check the balancer’s current state.

To verify that the balancer is disabled, run sh.getBalancerState(), which returns false if the balancer is disabled:

sh.getBalancerState()

For more information on disabling the balancer, see Disable the Balancer.

2

Upgrade the config servers.

  1. Upgrade the secondary members of the replica set one at a time:

    1. Shut down the secondary mongod instance and replace the 3.6 binary with the 4.0 binary.

    2. Start the 4.0 binary with the --configsvr, --replSet, and --port. Include any other options as used by the deployment.

      Note

      mongod --configsvr --replSet <replSetName> --port <port> --dbpath <path> --bind_ip localhost,<hostname(s)|ip address(es)>
      

      If using a configuration file, update the file to specify sharding.clusterRole: configsvr, replication.replSetName, net.port, and net.bindIp, then start the 4.0 binary:

      sharding:
         clusterRole: configsvr
      replication:
         replSetName: <string>
      net:
         port: <port>
         bindIp: localhost,<hostname(s)|ip address(es)>
      storage:
         dbpath: <path>
      

      Include any other settings as appropriate for your deployment.

      Note

    3. Wait for the member to recover to SECONDARY state before upgrading the next secondary member. To check the member’s state, issue rs.status() in the mongo shell.

      Repeat for each secondary member.

  2. Step down the replica set primary.

    1. Connect a mongo shell to the primary and use rs.stepDown() to step down the primary and force an election of a new primary:

      rs.stepDown()
      
    2. When rs.status() shows that the primary has stepped down and another member has assumed PRIMARY state, shut down the stepped-down primary and replace the mongod binary with the 4.0 binary.

    3. Start the 4.0 binary with the --configsvr, --replSet, --port, and --bind_ip options. Include any optional command line options used by the previous deployment:

      mongod --configsvr --replSet <replSetName> --port <port> --dbpath <path> --bind_ip localhost,<hostname(s)|ip address(es)>
      

      Note

      If using a configuration file, update the file to specify sharding.clusterRole: configsvr, replication.replSetName, net.port, and net.bindIp, then start the 4.0 binary:

      sharding:
         clusterRole: configsvr
      replication:
         replSetName: <string>
      net:
         port: <port>
         bindIp: localhost,<hostname(s)|ip address(es)>
      storage:
         dbpath: <path>
      

      Include any other configuration as appropriate for your deployment.

      Note

3

Upgrade the shards.

Upgrade the shards one at a time.

For each shard replica set:

  1. Upgrade the secondary members of the replica set one at a time:

    1. Shut down the mongod instance and replace the 3.6 binary with the 4.0 binary.

    2. Start the 4.0 binary with the --shardsvr, --replSet, --port, and --bind_ip options. Include any additional command line options as appropriate for your deployment:

      Note

      mongod --shardsvr --replSet <replSetName> --port <port> --dbpath <path> --bind_ip localhost,<hostname(s)|ip address(es)>
      

      If using a configuration file, update the file to include sharding.clusterRole: shardsvr, replication.replSetName, net.port, and net.bindIp, then start the 4.0 binary:

      sharding:
         clusterRole: shardsvr
      replication:
         replSetName: <string>
      net:
         port: <port>
         bindIp: localhost,<hostname(s)|ip address(es)>
      storage:
         dbpath: <path>
      

      Include any other configuration as appropriate for your deployment.

      Note

    3. Wait for the member to recover to SECONDARY state before upgrading the next secondary member. To check the member’s state, you can issue rs.status() in the mongo shell.

      Repeat for each secondary member.

  2. Step down the replica set primary.

    Connect a mongo shell to the primary and use rs.stepDown() to step down the primary and force an election of a new primary:

    rs.stepDown()
    
  3. When rs.status() shows that the primary has stepped down and another member has assumed PRIMARY state, upgrade the stepped-down primary:

    1. Shut down the stepped-down primary and replace the mongod binary with the 4.0 binary.

    2. Start the 4.0 binary with the --shardsvr, --replSet, --port, and --bind_ip options. Include any additional command line options as appropriate for your deployment:

      mongod --shardsvr --replSet <replSetName> --port <port> --dbpath <path> --bind_ip localhost,<hostname(s)|ip address(es)>
      

      Note

      If using a configuration file, update the file to specify sharding.clusterRole: shardsvr, replication.replSetName, net.port, and net.bindIp, then start the 4.0 binary:

      sharding:
         clusterRole: shardsvr
      replication:
         replSetName: <string>
      net:
         port: <port>
         bindIp: localhost,<hostname(s)|ip address(es)>
      storage:
         dbpath: <path>
      

      Include any other configuration as appropriate for your deployment.

      Note

4

Upgrade the mongos instances.

Replace each mongos instance with the 4.0 binary and restart. Include any other configuration as appropriate for your deployment.

Note

The --bind_ip option must be specified when the sharded cluster members are run on different hosts or if remote clients connect to the sharded cluster. For more information, see Localhost Binding Compatibility Changes.

mongos --configdb csReplSet/<rsconfigsver1:port1>,<rsconfigsver2:port2>,<rsconfigsver3:port3> --bind_ip localhost,<hostname(s)|ip address(es)>
5

Re-enable the balancer.

Using a 4.0 mongo shell, connect to a mongos in the cluster and run sh.setBalancerState() to re-enable the balancer:

sh.setBalancerState(true)

The 3.6 and earlier mongo shell is not compatible with 4.0 clusters.

For more information about re-enabling the balancer, see Enable the Balancer.

6

Enable backwards-incompatible 4.0 features.

At this point, you can run the 4.0 binaries without the 4.0 features that are incompatible with 3.6.

To enable these 4.0 features, set the feature compatibility version (FCV) to 4.0.

Tip

Enabling these backwards-incompatible features can complicate the downgrade process since you must remove any persisted backwards-incompatible features before you downgrade.

It is recommended that after upgrading, you allow your deployment to run without enabling these features for a burn-in period to ensure the likelihood of downgrade is minimal. When you are confident that the likelihood of downgrade is minimal, enable these features.

On a mongos instance, run the setFeatureCompatibilityVersion command in the admin database:

db.adminCommand( { setFeatureCompatibilityVersion: "4.0" } )

This command must perform writes to an internal system collection. If for any reason the command does not complete successfully, you can safely retry the command on the mongos as the operation is idempotent.

7

Restart mongos instances.

After changing the featureCompatibilityVersion, all mongos instances need to be restarted to pick up the changes in the causal consistency behavior.

Additional Upgrade Procedures