Docs Menu
Docs Home
/
MongoDB Manual
/ / /

fsync

On this page

  • Definition
  • Syntax
  • Command Fields
  • Considerations
  • Examples
fsync

Flushes all pending writes from the storage layer to disk. When the lock field is set to true, it sets a lock on the server or cluster to prevent additional writes until the lock is released.

New in version 7.1: When the fsync command runs on mongos, it performs the fsync operation on each shard in the cluster.

As applications write data, MongoDB records the data in the storage layer and then writes the data to disk within the syncPeriodSecs interval, which is 60 seconds by default. Run fsync when you want to flush writes to disk ahead of that interval.

Important

Servers maintain an fsync lock count. The fsync command with the lock field set to true increments the lock count while the fsyncUnlock command decrements it. To enable writes on a locked server or cluster, call the fsyncUnlock command until the lock count reaches zero.

Use this command to block writes when you want to perform backup operations.

Tip

In mongosh, this command can also be run through the db.fsyncLock() helper method.

Helper methods are convenient for mongosh users, but they may not return the same level of information as database commands. In cases where the convenience is not needed or the additional return fields are required, use the database command.

The command has the following syntax:

db.adminCommand(
{
fsync: 1,
lock: <Boolean>,
fsyncLockAcquisitionTimeout: <integer>,
comment: <any>
}
)

The command has the following fields:

Field
Type
Description
fsync
integer
Enter "1" to apply fsync.
fsyncLockAcquisitionTimeoutMillis
integer

Optional. Specifies the amount of time in milliseconds to wait to acquire locks. If the lock acquisition operation times out, the command returns a failed response.

Default: 90000

New in version 7.1.

lock
boolean
Optional. Takes a lock on the server or cluster and blocks all write operations. Each fsync with lock operation takes a lock.
comment
any

Optional. A user-provided comment to attach to this command. Once set, this comment appears alongside records of this command in the following locations:

A comment can be any valid BSON type (string, integer, object, array, etc).

New in version 4.4.

fsync command with the lock option ensures that the data files are safe to copy using low-level backup utilities such as cp, scp, or tar. A mongod started using the copied files contains user-written data that is indistinguishable from the user-written data on the locked mongod.

The data files of a locked mongod may change due to operations such as journaling syncs or WiredTiger snapshots. While this has no affect on the logical data (e.g. data accessed by clients), some backup utilities may detect these changes and emit warnings or fail with errors. For more information on MongoDB- recommended backup utilities and procedures, see MongoDB Backup Methods.

New in version 7.1.

When the fsync command runs on mongos, it performs the fsync operation on the entire cluster. By setting the lock field to true, it sets a lock on the cluster, preventing additional writes.

To take a usable self-managed backup, before locking a sharded cluster:

  • Ensure that no chunk migration, resharding, or DDL operations are active.

  • Stop the balancer to prevent additional chunk migrations from starting.

If your mongod has journaling enabled, use a file system or volume/block level snapshot tool to create a backup of the data set and the journal together as a single unit.

The fsync command returns a document includes a lockCount field. When run on mongod, the count indicates the number of fsync locks set on the server.

When run on a sharded cluster, mongos sends the fsync operation to each shard and returns the results, which includes the lockCount for each.

Note

If the lockCount field is non-zero, all writes are blocked on the server and cluster. To reduce the lock count, use the fsyncUnlock command.

Fsync locks execute on the primary in a replica set or sharded cluster.

If the primary goes down or becomes unreachable due to network issues, the cluster elects a new primary from the available secondaries. If a primary with an fsync lock goes down, the new primary does not retain the fsync lock and can handle write operations. When elections occur during backup operations, the resulting backup may be inconsistent or unusable.

To recover from the primary going down:

  1. Run the fsyncUnlock command until the lock count reaches zero to release the lock on all nodes.

  2. Issue the fsync command to reestablish the fsync lock on the cluster.

  3. Restart the backup.

Additionally, fsync locks are persistent. When the old primary comes online again, you need to use the fsyncUnlock command to release the lock on the node.

Note

fsync command with the lock option ensures that the data files are safe to copy using low-level backup utilities such as cp, scp, or tar. A mongod started using the copied files contains user-written data that is indistinguishable from the user-written data on the locked mongod.

The data files of a locked mongod may change due to operations such as journaling syncs or WiredTiger snapshots. While this has no affect on the logical data (e.g. data accessed by clients), some backup utilities may detect these changes and emit warnings or fail with errors. For more information on MongoDB- recommended backup utilities and procedures, see MongoDB Backup Methods.

The fsync command can lock an individual mongod instance or a sharded cluster through mongos. When run with the lock field set to true, the fsync operation flushes all data to the storage layer and blocks all additional write operations until you unlock the instance or cluster.

To lock the database, use the fsync command to set the lock field to true:

db.adminCommand( { fsync: 1, lock: true } )

The operation returns a document that includes the status of the operation and the lockCount:

{
"info" : "now locked against writes, use db.fsyncUnlock() to unlock",
"lockCount" : NumberLong(1),
"seeAlso" : "http://dochub.mongodb.org/core/fsynccommand",
"ok" : 1
}

When locked, write operations are blocked. Separate connections may continue read operations until the first attempt at a write operation, then they also wait until the sever or cluster is unlocked.

Important

The fsync lock operation maintains a lock count.

To unlock a server or cluster for writes, the lock count must be zero. That is, for the given number of times you perform an fsync lock, you must issue a corresponding number of unlock operations to unlock the server or cluster for writes.

To unlock a server of cluster, use the fsyncUnlock command:

db.adminCommnad( { fsyncUnlock: 1 } )

Repeat this command as many times as needed to reduce the lock count to zero. Once the lock count reaches zero, the server or cluster can resume writes.

To check the state of the fsync lock, use db.currentOp(). Use the following JavaScript function in the shell to test if the server or cluster is currently locked:

serverIsLocked = function () {
var co = db.currentOp();
if (co && co.fsyncLock) {
return true;
}
return false;
}

After loading this function into your mongosh session, call it with the following syntax:

serverIsLocked()

This function will return true if the server or cluster is currently locked and false if the server or cluster is not locked.

Back

filemd5