Docs Menu

Docs HomeDevelop ApplicationsMongoDB Manual

Modify PSA Replica Set Safely

On this page

  • Overview
  • Procedure

When reconfiguring primary-secondary-arbiter (PSA) replica sets or changing to a PSA architecture, you need to take special care in the following cases:

  • You want to reconfigure a secondary in an existing three-member replica set with a PSA architecture to become a voting, data-bearing node with a non-zero priority.

  • You want to add a new voting, data-bearing node with a non-zero priority to an existing two-member replica set that contains one primary and one arbiter.

Warning

This document outlines the procedure for reconfiguring your replica set in these specific cases without using the designated helper method rs.reconfigForPSASet().

If you are performing one of the preceding operations, it is necessary to reconfigure your replica set in two steps:

  1. Reconfigure the replica set to add or modify a secondary with { votes: 1, priority: 0 }.

  2. Once the added or modified secondary has caught up with all committed writes, reconfigure the secondary to have a non-zero priority { votes: 1, priority: <num> }.

The two-step approach avoids the possibility of rolling back committed writes in the case of a failover to the new secondary before the new secondary has all committed writes from the previous primary.

To run the rs.reconfigForPSASet() method, you must connect to the primary of the replica set.

1

To avoid rolling back uncommitted writes when adding or changing a voting, data-bearing node, it is required that you add the node with { priority: 0 } first.

In mongosh, modify the replica set configuration. To reconfigure an existing replica set, first retrieve the current configuration with rs.conf(), modify the configuration document as needed, and then pass the modified document to rs.reconfig():

cfg = rs.conf();
cfg["members"] = [
{
// existing member or members
},
{
"_id" : <num>, // The array position of the new member in the
// ``members`` array.
"host" : <host>,
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : 0,
"tags" : { <tags> },
"secondaryDelaySecs" : <num>,
"votes" : 1
},
{
// existing member or members
}
]
rs.reconfig(cfg);
2

Once the secondary is caught up, set the prority to the desired number. Before this reconfiguration succeeds, the secondary must replicate all the writes that were committed when it had zero votes. This is automatically checked when you issue the rs.reconfig() command.

cfg = rs.conf();
cfg["members"] = [
{
// existing member or members
},
{
"_id" : <num>, // The array position of the new member in the
// ``members`` array.
"host" : <host>,
"arbiterOnly" : false,
"buildIndexes" : true,
"hidden" : false,
"priority" : <num>,
"tags" : { <tags> },
"secondaryDelaySecs" : <num>,
"votes" : 1
},
{
// existing member or members
}
]
rs.reconfig(cfg);
←  Rename a Replica SetMitigate Performance Issues with PSA Replica Set →

On this page