• Agents >
• Automation Agent >
• Install or Update the Automation Agent >
• Install the Automation Agent with rpm Packages

Install the Automation Agent with rpm Packages

Overview

Ops Manager Automation relies on an Automation Agent, which must be installed on every server that runs a monitored MongoDB deployment. The Automation Agents periodically poll Ops Manager to determine the goal configuration, deploy changes as needed, and report deployment status back to Ops Manager.

Automation Agents can run only on 64-bit architectures.

Use this procedure to install the agent on RHEL, CentOS, SUSE, Amazon Linux, and other systems that use rpm packages.

If you cannot install to a host using the rpm package, install the agent using an archive. Ensure this agent runs as the same system user as the MongoDB process.

Prerequisites

Server Networking Access

The hosts that serve the MongoDB deployments must:

• Have full networking access to each other through their fully qualified domain names (FQDNs). Each host must be able to reach every other host through the FQDN.

  To find the FQDN for each host:

  • On Linux / macOS hosts, run the following command in the Terminal:

    copy

    hostname -f
    

  • On Windows hosts, run the following command in Powershell:

    copy

    net config workstation | findstr /C:"Full Computer name"
    

• Resolve each FQDN to a unique IP address.

  Run the following domain internet groper (dig) shell command to find the host’s IP address.

  copy

  dig +short myip.opendns.com @resolver1.opendns.com
  

  Note

  dig is available for Microsoft Windows. Download and install the BIND tools from http://www.isc.org/downloads/

• Set the Common Name or Subject Alternative Name value of any SSL certificates to the MongoDB host’s FQDN.

The network configuration must allow each Automation Agent to make a direct connection to every MongoDB deployment listed on the Deployment page. Ops Manager does not support port forwarding.

Installing to a Server that Already Runs MongoDB

If you install the Automation Agent to a server that is already running a MongoDB process, the agent must have:

• Permission to stop the MongoDB process. The Automation Agent will restart the process using the agent’s own set of MongoDB binaries. If you had installed MongoDB with a package manager, use the same package manager to install the Automation Agent. This gives the agent the same owner as MongoDB.
• Read and Write permissions on the MongoDB data directory and log directory.
• Permission to stop, start, and update any existing Monitoring and Backup Agents.

Installing to a Server Before Installing MongoDB

If you deploy the Automation Agent to a server that does not have MongoDB installed, ensure the user that owns the Automation Agent has Read and Write permissions on the MongoDB data and log directories you plan to use.

Procedures

This section includes procedures for both installing and updating the Automation Agent.

Install the Automation Agent with an rpm Package

Installation Tip for Binding the Agent to a Project

You can also access install instructions in Ops Manager, including commands you can copy and paste: click Deployment, then Agents, then Downloads & Settings.

1

Login to Ops Manager.

2

Begin or Manage a Deployment

1. Click Build New or Manage Existing to begin the deployment wizard. When you reach the Install an Automation Agent on each server page, all hosts are listed.
2. Click on the Install Agent menu of the first MongoDB host.
3. Select <Linux-Distribution> - RPM.

3

Download the latest version of the Automation Agent archive.

On a system shell, issue a curl command to download the rpm for the agent that works on your platform:

Note

Replace <OpsManagerHost:Port> with the hostname and port of your Ops Manager installation.

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

copy

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

copy

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 12, and Amazon Linux on x64 architecture:

copy

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rpm

4

Install the Automation Agent Package

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

copy

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

copy

sudo rpm -U mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 12, and Amazon Linux on x64 architecture:

copy

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rpm

5

Generate an agent API key or retrieve an existing agent API key for your Ops Manager group.

1. Click + Generate Key.

Note

The button appears only if the current user is the project owner and the project either has no Agent API keys or just the Original Group API key. An Original Group API key exists only in projects created prior to the new Agent API Key model. The new model allows a project to have more than one key and permits any of the project’s agents to use any of the keys. For more information, see Manage Agent API Keys. If you do not see the + Generate Key button and do not remember your existing agent api key, you can generate a key on the Agent API Keys tab. To navigate to the tab, select Deployment view, then click the Agents tab and then the Agent API Keys tab.

2. Enter your password and click Verify.
3. Click + Generate Key again.

Important

When you generate an Agent API key, Ops Manager displays it one time only. You must copy it and store it in a secure place. Ops Manager will never display the full key again.

6

Edit the automation-agent.config file.

In the directory where you installed the Automation Agent, edit the automation-agent.config file to either:

• Bind to a specific project via the mmsGroupId, mmsApiKey, and mmsBaseUrl settings.

  - or -

• Add the server to a server pool via serverPoolKey, serverPoolPropertiesFile, serverPoolStateFile, and mmsBaseUrl settings.

Open the file with an editor. For example:

copy

sudo vi /etc/mongodb-mms/automation-agent.config

Configure for a Specific Project

Update the following configuration keys:

• For mmsGroupId, set to your ProjectID.
• For mmsApiKey, set to the project’s agent API key.
• For mmsBaseUrl, set to the URL of the Ops Manager Application. Include the port number.

copy

mmsGroupId=<Project ID>
mmsApiKey=<agent API key>
mmsBaseUrl=<application URL>

Do not configure the server pool settings: serverPoolKey, serverPoolPropertiesFile, serverPoolStateFile.

For SUSE 12+ deployments only, configure the sslTrustedMMSServerCertificate setting. Omit this step for other operating systems.

copy

sslTrustedMMSServerCertificate=/etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem

Configure for a Server Pool

Update the following configuration keys:

• For mmsBaseUrl, set to the URL of the Ops Manager Application. Include the port number.

• For serverPoolKey, set to the Server Pool Key.

  To find the server pool key, in the Admin menu, go to Server Pool view and click on the Agent Configuration tab.

• For serverPoolPropertiesFile, set to the full filepath of a file that contains server properties. Ensure the Automation Agent can read the file.

  The properties file contains key/value pairs of the form <property>=<value>. The Ops Manager Administrator decides on both the property names and values.

  Note

  Ensure that the properties file contains the desired property names and values before starting the Automation Agent on the server.

  Once the server is registered with the pool, changes to the properties file do not take effect until the server is first removed and the Automation Agent restarted.

• For serverPoolStateFile, set to the full filepath of the file to be used by the Automation Agent.

  Ensure that the directory path to the file exists and the agent has read and write access to the directory. The file itself need not exist; however, if it does exist, the agent must have read and write access to the file.

copy

mmsBaseUrl=<application URL>
serverPoolKey=somekeyabc123
serverPoolPropertiesFile=<path to server properties file>
serverPoolStateFile=<path to server state file>

Do not configure the project settings: mmsGroupId and mmsApiKey.

For SUSE 12+ deployments only, configure the sslTrustedMMSServerCertificate setting. Omit this step for other operating systems.

copy

sslTrustedMMSServerCertificate=/etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem

7

Optional: Configure the Automation Agent to use a proxy server.

To configure the agent to connect to Ops Manager via a proxy server, you must specify the server in the httpProxy environment variable. In the /etc/mongodb-mms/automation-agent.config file, set the httpProxy value to the URL of to your proxy server:

copy

httpProxy="http://proxy.example.com:9000"

8

Prepare the data directory.

The data directory stores MongoDB data and must be owned by the `mongod` user. For an existing MongoDB deployment, ensure the directory has the mongod user as owner. If no MongoDB deployment exists, create the directory and set the owner.

The following commands create a data directory and set the owner as the mongodb user:

copy

sudo mkdir /data
sudo chown mongodb:mongodb /data

9

Start the Automation Agent.

Issue the following command:

copy

sudo service mongodb-mms-automation-agent start

10

Verify that the Automation Agent can connect to Ops Manager.

Click Verify Agent on the Automation Agent Installation Instructions modal.

Update the Automation Agent with an rpm Package

Important

If any Automation Agent for any deployment is out of date, Ops Manager displays a warning on the Deployment page.

If you use this procedure, you do not need to stop the agent. The update package automatically stops, unpacks, and then restarts the agent.

1

Log in the the host where the Automation Agent is installed.

2

Stop any currently running Automation Agents.

Issue the following command on the MongoDB host:

copy

pkill -f mongodb-mms-automation-agent

3

Login to Ops Manager.

4

Click Deployment, then Agents, and then Downloads & Settings.

5

Download the latest version of the Automation Agent archive.

On a system shell, issue a curl command to download the rpm for the agent that works on your platform:

Note

Replace <OpsManagerHost:Port> with the hostname and port of your Ops Manager installation.

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

copy

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

copy

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 12, and Amazon Linux on x64 architecture:

copy

curl -OL https://<OpsManagerHost:Port>/download/agent/automation/mongodb-mms-automation-agent-manager-latest.x86_64.rpm

6

Install the Automation Agent Package

For RHEL / CentOS (7.x) and SUSE 12 on x64 architecture:

copy

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rhel7.rpm

For RHEL / CentOS (7.x) on PowerPC architecture (managing MongoDB 3.4 or later deployments only):

copy

sudo rpm -U mongodb-mms-automation-agent-manager-latest.ppc641e.rhel7.rpm

For RHEL/CentOS (5.X, 6.X), SUSE 12, and Amazon Linux on x64 architecture:

copy

sudo rpm -U mongodb-mms-automation-agent-manager-latest.x86_64.rpm

7

Prepare the data directory.

The data directory stores MongoDB data and must be owned by the `mongod` user. For an existing MongoDB deployment, ensure the directory has the mongod user as owner. If no MongoDB deployment exists, create the directory and set the owner.

The following commands create a data directory and set the owner as the mongodb user:

copy

sudo mkdir /data
sudo chown mongodb:mongodb /data

8

Start the Automation Agent.

Issue the following command:

copy

sudo service mongodb-mms-automation-agent start

←   Install or Update the Automation Agent Install the Automation Agent with deb Packages  →

© MongoDB, Inc 2008-present. MongoDB, Mongo, and the leaf logo are registered trademarks of MongoDB, Inc.